Pattern-Coat Primer over Vac-Cast Epoxy Resin ?

Talk Composites - The Forum for Advanced Composites

Back

Home
»
Advanced Composites Forum
»
Pattern and Plug Making
»
Pattern-Coat Primer over Vac-Cast Epoxy Resin ?

Pattern-Coat Primer over Vac-Cast Epoxy Resin ?

Pattern-Coat Primer over Vac-Cast Epoxy Resin ?

Author	Message
TURK	TURK posted 8 Years Ago HOT Topic Details
Group: Forum Members Posts: 101, Visits: 662	Hi guys, With reference to my 'Quad Headlight Project'. I'm trying to remedy an issue I have ......... Basically, I made two tooling plugs out of Vac-Cast Epoxy resin, and because of the amount of shrinkage I got from the material, my tooling plugs are 2mm too small. What I'm hoping to do is to 'build-up' the tooling plugs by applying a few coats of Pattern-Coat Primer. Is This possible ? As a picture speaks a thousand words ( or in this case, a few pictures ) here's the process I used ....... I used CS25 Silicone rubber to make the moulds after I had made the original plugs. I got shrinkage from the Silicone, I then cast my 'Vac-Cast' Epoxy resin into my silicone moulds ( got more shrinkage from the vac-cast resin ), then I vacuum formed the parts I needed ( headlight mounting brackets ) got more shrinkage from the 3mm ABS I'm using ........ the result is, my ABS plastic headlight mounting brackets are 2mm too small all around their circumference ! >> The vac-cast resin tooling plugs came out absolutely superb, well chuffed with that and my very first vacuum formed parts >> After I cut and profiled the parts things were looking very good indeed >> And with the headlight units installed >> Then comes the assembly ........ the parts I make will fit the OE headlight retainers, as you can see from the red arrow there's a 4mm gap As I only need the 'footing' or base of the part to fit inside the headlight retainer, I'm thinking I could simply apply a few coats of Pattern-Coat Primer around the base of my tooling plugs to close that gap ....... do you think this would work ? >> This fix is only a temporary measure guys, until I get the dimensions correct, once the bracket fits in there correctly I'll simply make some more silicone moulds with these 'fixed' tooling plugs. The entire process is here > T4 Quad Headlight Project Thanks all. TURK Tags Headlight Project Quad T4 Vacuum forming
	Reply Like 6
Warren (Staff)	Warren (Staff) posted 8 Years Ago HOT Post Details
Group: Administrators Posts: 2.5K, Visits: 8.5K	Hi Turk, As a temporary measure I don't see why that wouldn't work. As usual, give the surface a good key so the Pattern Coat will bond to it and in effect, build up layers of the Pattern Coat Primer in the normal way and sand back to the desired shape before polishing the surface back to a gloss. Although the Primer does not have an aluminium filler to help with temperature stability, I suspect for a one off use it would be ok as the heat would dissipate quickly from one pull from the mould. Warren Penalver Easy Composites / Carbon Mods - Technical Support Assistant
	Reply Like 5
TURK	TURK posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 101, Visits: 662	Excellent ....... that's good to know Warren It's only 2mm all the way round the footing, so not much, will take a while to build it up though. I can just use those 'modified' tooling plugs to make some more silicone moulds afterwards ........ once I've confirmed the fit. Think I'll use the AS40 'addition cure' (platinum cure) silicone rubber for the next moulds as we discussed on the phone, should be more stable with less shrinkage. Thanks for your help mate, very much appreciated. TURK
	Reply Like 5

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search