Hello,
my name is Arnost, I'm working for CSRC company (www.csrc.cz). We are looking for some degassing equipment and I really like this arragment: Complete Vacuum Degassing System (https://www.easycomposites.co.uk/ds26-s-complete-starter-vacuum-degassing-system But maybe I will need bigger vacuum. Could you please tell us maximal allowable pressure applied at these products:

Professional Resin Infusion Catch-Pot

https://www.easycomposites.co.uk/cp1-resin-infusion-catch-pot-small

Vacuum Degassing Chamber 26L

https://www.easycomposites.co.uk/dc26-vacuum-degassing-chamber-26l

Thank you in Advance,
Arnost Pavlik

Slightly below 1 Bar i assume ...

They will hold almost full vacuum .. which in turn means 1 Bar/Atm on the outside ..

Most oil-filled Single-stage vacuum pumps typically produce vacuum to 35 Torr (mm Hg) or 0.047 bar

Handling vacuum for composites purposes is not like using it for scientific experiments or devices that need an internal vacuum to function (Bulbs / vacuum tubes for electronics)


In short: You do not need higher vacuum than the EC "containers" can hold ..   At least not for ordinary degassing of resins e.t.c


"Sapere Aude"... Dare to KNOW!

The written word is the only truly efficient vehicle for transmitting a complex concept from mind to mind...

103% of all people do not understand statistics...

Do not adjust our mind, theres a fault in reality :-)

We prefer two-stages vacuum pumps. Because at previous projects we had requirement for 10^-3 Torr, for adhesive degassing.