Bottle cap table

Talk Composites - The Forum for Advanced Composites

Back

Bottle cap table

Bottle cap table

Author	Message
Daveleach	Daveleach posted 9 Years Ago HOT Topic Details
Group: Forum Members Posts: 2, Visits: 144	good evening, I'm trying to create bottle top table. Which product is best suited too this, and what is the optimum thickness I should be aiming for?
	Reply Like 3
Reply
Daveleach	Daveleach posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 2, Visits: 144	Thanks for your reply, and advice The bottle tops are sunk into a piece of wood. So far I have filled the caps using a hot glue gun. I will then use hot glue gun to stick them down. So you say on 1st pour just over the bottle caps And then a further pour which would be over the bottle caps again and also the surrounding edges. As I have a border around the caps which is obviously about 1mm higher than the caps. Would I need too key the surface up prior to the second coat? I would also like the edges too be finished with the resin too give the gloss look. So will,it be ok to pour and let it flow over the edges? Thanks again
	Reply Like 2

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Threaded View

Bottle cap table

Daveleach - 9 Years Ago

Hi Dave, We have a great product for that kind of application. The product is our GlassCast Clear...

Warren (Staff) - 9 Years Ago

Thanks for your reply, and advice The bottle tops are sunk into a piece of wood. So far I have...

Daveleach - 9 Years Ago

If you leave the first layer to fully cure then, yes a key with sandpaper will be best to achieve...

Warren (Staff) - 9 Years Ago

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search