Clear coating products

Author	Message
MarkMK	MarkMK posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 338, Visits: 2K	I'm planning to have a first go at clear coating one or two small pre-preg parts that have turned out with moderate pin-holing and smallish surface voids I was considering coating the affected areas with epoxy, flatting back with medium grit paper and then spraying. Can anyone recomnend a tried and trusted 2k paint system and the size range of gun nozzle I should be looking at for good results? Thanks Mark
	Reply Like 6
Reply
Fasta	Fasta posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 468, Visits: 3.5K	I do the same kind of thing but I brush the first coat which also pushes it into the porosity. With a brush in one hand you spray coat it and just brush straight over it quickly. Then carry on with multiple spray coats and it just gets better and better. For the brushing coat you need to apply enough by gun to be wet enough for brushing since it tacks off fast. Small areas are easier of course. Does that make sense, brush application with a spray gun?? Fastacraft Facebook page
	Reply Like 7

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

MarkMK - 10 Years Ago

Fasta - 10 Years Ago

MarkMK - 10 Years Ago

Fasta - 10 Years Ago

MarkMK - 10 Years Ago

Hanaldo - 10 Years Ago

Fasta - 10 Years Ago

That makes perfect sense, of course :D Thanks guys

MarkMK - 10 Years Ago

carbon man - 4 Years Ago

MarkMK - 4 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google