120°C composites tooling system

Author	Message
Edward	Edward posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 13, Visits: 539	Hi, professors, I have a question how to cut the cost of 120°C composites tooling system. the dimensional accuracy we hope will be ±0.5mm or ±0.2mm。the part what I want would be used in general industry: car,train,boat,sport,medical,plane,..... I don't want to use tooling epoxy block to make the master mould, and also I dont want to use the epoxy Tooling prepregs to laminate the tooling. this tow metirials is too expensive and the process cost a lot. do we have any other choice? beijing of China Edited 11 Years Ago by Edward
	Reply Like 6
Reply
ChrisR	ChrisR posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 363, Visits: 3K	The thing is that the tooling resin/prepregs you are talking about are designed to meet this exact requirement i.e. initial elevated temp cure at 50-60deg then are dimensionally stable for an off the mould high temp post cure
	Reply Like 5

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Edward - 11 Years Ago

f1rob - 11 Years Ago

Edward - 11 Years Ago

The thing is that the tooling resin/prepregs you are talking about are designed to meet this exact...

ChrisR - 11 Years Ago

Warren (Staff) - 11 Years Ago

Edward - 10 Years Ago

Davidpetty1988 - 9 Years Ago

a big company :), I know them in composites area, but I have not touch them.

Edward - 9 Years Ago

Warren (Staff) - 9 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google