Talk Composites - The Forum for Advanced Composites

High Temp resin post curing - Can I expect YELLOWING?

http://www.talkcomposites.com/Topic893.aspx

By GEARHEAD - 2/29/2012 4:19:16 PM

   I have completed a skinning of my motorcycle exhaust cans (using the EC HighTemp Epoxy) and am preparing to post-cure using the procedure on the spec sheet. Another forum suggested I may encounter yellowing of the resin as you heat cure above 150 C. 

Does EasyComposites resins have any experience with this characteristic of yellowing? 

Any info would be much appreciated. 
Thanx,
     GEARHEAD ... USA
By workaholic_ro - 3/19/2012 6:12:30 PM

I had the luck to feel in my hands parts used in F1.

A slight yellow tint is normal for some resins, but not as a general rule. Check the manufacturer specs.