By benet - 5/3/2013 10:28:30 PM
I keep coming across the same problem.
In the final stage of flatting and polishing minute white speckles appear in the epoxy.
My process, 1 st coat , coating epoxy , 8 > 10 hr cure @ 20*
hand 120 dry sand , brush off dust , vacume.
2nd coat , coating epoxy 8 > 10 hrs cure @ 20*
hand sand wet - 320 > 600 > 1200 > 1500 > 2000
everything looks good at this stage even flat finish no blemishes really, just needs buffing up...
so
machine polish - ( cheap electric car plisher ) onto wet surface - farecla standard compound G 3 ( SPECKS APPEAR  > farecla ploshiing compound G10 ( SPECKS REMAIN )
it does not always happen but it doeas happen a lot
any ideas
Ben
|
By fgayford - 5/16/2013 3:31:08 AM
Yes it is wax and you would not be able to clear on to that. I was just suggesting it if you are as done as you are going to go. Then the black in the wax would hide the tiny pin holes.
Fred
|
|