By schleeweiss - 1/11/2013 7:07:40 PM
Hi,
For my caterham supers even I would like to laminate some windscreen stanchions out of carbon. As these stancions are not flat, they have to be laminated in the correct curve.
Links to the original parts:
http://www.caterhamparts.co.uk/product.php?id_product=1227
http://www.caterhamparts.co.uk/product.php?id_product=1228
My intention is to put the parts on the car as they are, without any paint. Therefore my intention is to have both sides flat. The inner side because of laying directly on the aluminum body panel, the outer side because of optical reasons (glossy finish).
May I ask the experienced with which technique I (beginner) should start?
Many thanks in advance 
Regards from cold switzerland,
Markus
|
By brasco - 1/14/2013 10:49:20 PM
CF resin can be painted
to abrade the surface i suggest P400 grit or finer. P1000/P1200 i think would be too fine.
|
|