Talk Composites - The Forum for Advanced Composites

Easy-Lease alternative for high-temp molds & XPREG or other prepreg systems.

http://www.talkcomposites.com/Topic40130.aspx

By Noah Lieske - 5/6/2021 1:59:12 AM

Hello - 

Great forum, thanks..

I would typically use Easy-Lease or Frekote 700-NC for high-temperature mold release on XPREG prepreg application.  However, both appear to be a long delivery cycle (2 weeks+ currently) and we need to cure a part tomorrow / next day.  

Does anyone have an alternative to either of these that works well for XPREG (or other prepreg materials) that could be readily available in the US? 

Thanks!
By KLComposites - 5/6/2021 7:59:42 PM

 
noahark - 5/6/2021 1:59:12 AM
Hello - 

Great forum, thanks..

I would typically use Easy-Lease or Frekote 700-NC for high-temperature mold release on XPREG prepreg application.  However, both appear to be a long delivery cycle (2 weeks+ currently) and we need to cure a part tomorrow / next day.  

Does anyone have an alternative to either of these that works well for XPREG (or other prepreg materials) that could be readily available in the US? 

Thanks!

Try Axel XTend 1110EP Release and XTR Sealer. It's a two component system but it's what we use and it works just fine. Should be available in short order. Call Nick DiMeo of Competition Marketing - 856.223.1420