By mikew - 12/12/2012 11:03:20 AM
I'm making something similar to this
which holds this
So I need to take a mould off the back of the unit above to get the profile. It needs to be a snug fit in the holder and I'm wondering what thickness of wax sheet would be best to get the profile correct, 2 mil or 5?
Also when the wax sheet is on, I've seen that some put packing tape over it to prevent sticking, is that a definite method because surely it means sanding work on the mould to remove any lines caused by the tape?
|
By mikew - 12/16/2012 2:37:47 PM
Cheers both. Using unimould system to make the moould then caron kevlar/epoxy/soric/ply/bag
|
|