Talk Composites - The Forum for Advanced Composites

Best way to make fiberglass angles

http://www.talkcomposites.com/Topic35005.aspx

By mporta71 - 3/4/2020 4:58:33 PM

Hi, I would like to make angles similar to the pre-preg ones on sale on the EC website, but in epoxy + fiberglass.
Thickness has to  be 5mm.
What is the best way to build the mould?
By mporta71 - 3/13/2020 12:43:54 PM

 
Warren (Staff) - 3/9/2020 4:20:01 PM
You could do it with an inner mould as well as a compression mould.  Clamp the moulds together with some wood as a load spreader and wind up the load.  That way when it's cured you will get a gloss finish on both sides of the angle. 

Thank you!