By alex3horse - 6/28/2019 8:53:34 AM
Hi which type of epoxy is best for mixing with fillers please? Without lots of smelly fumes too  Thanks
|
By Warren (Staff) - 6/28/2019 1:30:40 PM
As long as you use a slow hardener and quite a good quantity of filler powders, then you should be ok. The danger with fillers like this is excessive exotherm if the heat does not dissipate - eg you use a small amount of bubbles and fillers.
By sure the safest way would be to use a casting resin to make the filler paste. It would already have the slow cure time to help avoid exotherming and can still support a lot of fillers and pigments. A good one to go for when doing thicker casts would be our GlassCast 50 Clear Epoxy Casting Resin
|
|