By flamano - 6/11/2019 1:57:27 PM
Pump failed during an initial low-temp cure cycle using the XT135 Tooling prepreg.(400mm diameter x 22mm part size)
I have emptied out the oil and it is a dark brown colour.(no metal checked with a magnet) The pump is seized however the motor seams to want to turn.
Order the pump on 13/05/2019 and has been used three times.
|
By Warren (Staff) - 7/1/2019 2:59:05 PM
Hi,
I have resent it to the email address you gave me (same as one used last week). Please check the spam filter as it has an attachment and some email inboxes do not like these.
|
|