By oberflaeche - 1/1/2019 11:59:37 AM
Has anybody ever had experience with MTI-hose here?
Regards
Frank
|
By oberflaeche - 1/4/2019 9:47:50 AM
Thank you for your assessment. Yes, the MTI hose is an expensive solution. However, it could help me with my front fender. For example, I could initiate the infusion over the back of the mold directly into the mounting points after drilling some holes. (2)
In this way, I would not have to fill the screwing points with chopped carbon fiber strands and resin, but could insert tissue and soak the whole component in one go. Connected, however, with the additional costs of 10, - € per component.
L. G.
Frank
|
|