Talk Composites - The Forum for Advanced Composites

EL2 Laminating resin mixing problem

http://www.talkcomposites.com/Topic30587.aspx

By catacls - 10/4/2018 7:06:38 PM

Hello. Sorry for opening a new topic, i have not found a similar issue anywhere else.
The problem occurs when I m mixing the resin with the combined slow and fast hardner. After thorough mixing, some white flakes start to appear in the cup that float arround. If i mix them separately, the mixing is completely clear. I have tried putting the hardners in the cup firstly and mixing them thoroughly before adding the resin, but with no result, everytime the hardners are combined it is like the resin starts coagulating when mixing.
By Steve Broad - 10/23/2018 4:43:01 PM

 
Rich (Staff) - 10/23/2018 4:30:17 PM
I was just going to say Steve, it would have been road transport because of the DG nature of the materials.

Ah, good point. But at least that possibility has been eliminated :-)