By Andrew Murdoch - 7/23/2018 2:46:54 PM
How long approximately do you have to leave Glass Cast 3 base coat (sealer) on wooden floor boards before you can apply final top pour? and does the base coat require sanding before applying top coat?
|
By Warren (Staff) - 7/23/2018 3:57:10 PM
Normally we would recommend leaving a sealing coat for the full 24 hours then sanding prior to the next pour. In theory you could leave it the 10 -14 hours before it becomes firm but tacky then re-pour straight away. However in practice, this is not always very practical especially in a room as you may need access to the far side to do the pour and help spread the resin before moving back towards the door way.
|
|