Talk Composites - The Forum for Advanced Composites

Infusion problems

http://www.talkcomposites.com/Topic2156.aspx

By pedcrist - 7/5/2012 11:13:57 AM

Hi,

I´ve made a part by RTM and i´ve got a few problems.

The part is composed by:

-one layer of 2x2 twill carbon fiber 200grs

-one layer of soric 2mm

-one layer of 2x2 twill carbon fiber 200grs



Theproblems that occured are:

-the hexagonal shape of the soric has been printed at the first carbon layer

-this same layer has been a little bit dry, and printed the fibre shape at themould.



Here are few fotos attached for you to take a better look:

http://i675.photobucket.com/albums/vv112/pedcrist/Carbon/Firstlayer_1.jpg

http://i675.photobucket.com/albums/vv112/pedcrist/Carbon/Mould_3.jpg

 

 

 

 

 
By pedcrist - 7/8/2012 9:55:13 PM

Thanks for the explanations, Kev!!!

Pedro