Talk Composites - The Forum for Advanced Composites

Silicone intensifiers

http://www.talkcomposites.com/Topic19668.aspx

By Darren - 10/27/2015 8:14:02 PM

Has any one used/made intensifiers?

And can they be used with infusion?

Im having real trouble getting my stack right down in to a small sharp 90 degree bend, it only bridges a very small amount…
By Darren - 11/1/2015 1:37:52 PM

VVS (28/10/2015)
Should be able to get that to pull down with a little thought,

main problems ive had with bridging in a part like that is mostly due to the excess/off part carbon clamping and not sliding.

you always get really good vac on the flats, these clamp first then stop the cloth from seating in the corners, ive found if you cut back as much of the over hang/ off part cloth as you can it will pull in.




I cut off as much excess as i could and the end result was perfect..

Thanks