By davro - 9/30/2014 9:22:00 PM
Hi,
I finally got around to creating a mould for 1/10 scale touring car, so I thought I would share with you helpful people 
I had a brand new body shell left over from me racing days.
This new body shell was the perfect candidate to take a mould from, and I also had quite a bit of Easy Composites Uni Mould System left over from a previous project
So I had all the necessary goodies to create a 1/10 body shell mould!
And some spare time to make a mould and video with some royalty free music, good times  - Easy Leased the table 2 coats
- Easy Leased the body shell 3 coats
- Uni-Mould Tooling Gelcoat 3 medium coats
- Uni-Mould Coupling Coat (100g Chopped Strand Mat)
- Uni-Mould Tooling Resin (450g Chopped Strand Mat)
- Lots of gloves and plastic cups
Here is a video showing the making of the mould.
|
By davro - 10/19/2014 6:37:43 PM
Stickers on and Clear Coat applied 
) Finish spoiler
) Sand back with 3000 grit
) Polish
Pleased with having the stickers under the clear coat gives a nice effect
|
|