Talk Composites - The Forum for Advanced Composites

Hello from Davro, mainly working on Daxro

http://www.talkcomposites.com/Topic10692.aspx

By davro - 4/7/2014 1:20:19 PM

Hi All,

Live in England, London, new to the composite, pattern, mould making world. 

Have been around for a few months reading and watching threads develop.

My first project is learning about making small moulds, taking a mould and producing simple trays for viewing samples.
Start to Finish video https://www.youtube.com/watch?v=g7VuyIxMnrI

Now moving onto the big project building of a body package for my kitcar Daxro (https://www.youtube.com/channel/UCr-RQnBLtj2a7y2PPgjiCew/videos)

Any help advice would be much appreciated 

Davro
By davro - 4/7/2014 9:29:17 PM

They where from the Dax Harlow Factory, I was very disappointed when I unpacked them.

I was thinking infusion now I have the large pump and degassing chamber.

The moulds I have planned so far, will start a thread in projects -> motorsport vehicle design and mods.
Each mould will have the left and right sides, to keep the amount of moulds at a minimum.

1) Door Base.
2) Door Rear (quarter panel)
3) Door Outer skin.
4) Door Inner skin.
5) Window support with built in door hinge

# Unplanned 
6) Window Top Loop (with t top connection) 
7) Roof (with flip up door taking inspiration from donkervoort http://www.donkervoort.com/ but much simpler)
8) ...