Talk Composites - The Forum for Advanced Composites

Easy composites Vacuumpump

http://www.talkcomposites.com/Topic1015.aspx

By matthieutje65 - 3/14/2012 8:49:09 PM

Hi all,

I have a small question, is it possible to change the hoseconnector on the pump from a 6mm tubing to a 10mm tubingconnector?
Is it glued to the pump or is it attached with screw thread or a combination of glue and thread? :p
By Joe - 3/14/2012 9:03:58 PM

Hi Matthieu,

The thread on the pump itself is a female 1/4" bsp. Connector is not glued, just set with teflon tape. You can then easily change it to what you want.

Cheers from Belgium.